HAPI Helicopter Approach Path Indicator, Green/Red LED

Request a quote Request a quote

🚚
DHL Express → UAE: from ~130 AED · delivery ~2-3 days (est. weight 1 kg)
Exact cost calculated at checkout based on your address · estimate
Description

HAPI Helicopter Approach Path Indicator, Green/Red LED

The HAPI (Helicopter Approach Path Indicator) shows the pilot, by day and night, whether the helicopter is on the correct approach slope to the heliport. It is intended for hospital, rooftop, ground-level and offshore heliports.

Benefits

  • Precise slope guidance: four signal sectors (flashing green, steady green, steady red, flashing red) and a 45-minute on-slope sector.
  • Day and night: minimum intensity up to 9000 cd with 100%, 30% and 10% steps.
  • Verified aiming: built-in digital clinometer; any deviation above 0.5° triggers an alarm and switches the LEDs off.
  • Choice of power: 48 V DC, 24 V DC solar, 110–230 V or 2.8–6.6 A series circuit from a CCR.
  • Built for heat and sand: IP65, 0–100% humidity, rated -40 °C to +55 °C, hardened front glass for sandblast protection.
  • Frangible mounting: frangible couplings and tripods for safe installation.

Technical specifications

  • Ordering code: AL-117-76-GR-RE
  • Light source: 72 high-power LEDs (36 green and 36 red)
  • Signal format: above: flashing green (2 Hz); on slope: steady green; slightly below: steady red; below: flashing red (2 Hz)
  • On-slope sector: 45 minutes of arc
  • Minimum intensity (red/green): 9000 cd at 3° azimuth / 2° elevation; 6375 cd at 6°/4°; 3750 cd at 9°/6°; 1875 cd at 12°/8°; 375 cd at 15°/10°
  • Vertical aiming angle: up to 12°
  • Clinometer: built-in digital, factory-set zero; alarm and LED shutdown on deviation > 0.5°
  • Power supply: 48 V DC from controller; 24 V DC from solar system; 110–230 V, 50/60 Hz; 2.8–6.6 A series from CCR
  • Brightness steps: 100%, 30%, 10% (all power options)
  • Power consumption: max. 50 W + 20 W heater
  • Recommended transformer (CCR): 100 W
  • Degree of protection: IP65
  • Operating temperature: -40 °C to +55 °C
  • Humidity: 0–100%
  • Overall dimensions: 583 × 430 × 406.5 mm
  • Packaging: ISPM15-compliant wooden crate, 650 x 500 x 1400 mm, 26 kg
  • Mounting: frangible couplings and tripod

Standards and compliance

  • ICAO Annex 14, Volume 2 (Heliports), Fourth Edition, July 2013
  • Photometry: ICAO Figure 5-11 illustration 4 – HAPI system and Figure 5-15 – HAPI signal format
  • Chromaticity: Section 5.3.5.30; ICAO Annex 14 Vol. I, fig. A1-1b (solid state aeronautical ground lights)
  • ISPM15-compliant packaging

Applications and installation

The HAPI unit is mounted on tripods with frangible couplings and can be aimed at any vertical angle up to 12°. The built-in digital clinometer has a factory-set zero, two buttons and a display for coordinates and brightness level; the correct field position is saved by pressing both buttons together. The power option is specified with the order: 48 V DC from a controller (e.g. Heliport Controller V3, AL-078-AX, which can also read the fault contact), 24 V DC from a solar system, 230 V AC directly from the mains, or 2.8–6.6 A through a 100 W isolating transformer from a constant current regulator (CCR). The optional thermostat-controlled heater is ordered separately. Accessory: tripod AL-173-AX. Supplied in an ISPM15 wooden crate for export. Ideal for hospital, rooftop, offshore and oil & gas heliports in the UAE and GCC. Designed and manufactured in Europe.

Frequently asked questions: HAPI

What does the pilot see in each sector?

Above slope – flashing green (2 Hz); on slope – steady green; slightly below – steady red; below slope – flashing red (2 Hz).

What if the unit is knocked out of alignment?

Once the field position is saved, any deviation greater than 0.5° triggers the alarm and switches the LEDs off so the pilot never gets a false indication.

Can it run on solar power?

Yes, a 24 V DC solar supply option is available, with 100%, 30% and 10% brightness steps.

Ordering and support

Price on request. The EcoSolaris team in Dubai helps you choose the right configuration (power supply, mounting, colour, accessories) and sends a formal quotation.

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shipping & Delivery
Datasheets

Download the full technical datasheet — English or Arabic:

📄 Technical datasheet (EN, PDF)📄 النشرة الفنية (عربي، PDF)

Price on request · Photometric files and installation drawings on request: [email protected] · WhatsApp