Heliport Flat FATO / Aiming FD LED Light, 8.4 W
Request a quote Request a quote
Heliport Flat FATO / Aiming FD LED Light, 8.4 W
The Flat FATO / Aiming FD light is a low-profile omnidirectional white light for marking the FATO (Final Approach and Take-Off area) perimeter and the aiming point. With its integrated junction box and protected surface cabling, it installs quickly on existing platforms without structural drilling. It serves ground-level and rooftop heliports at hospitals, towers and offshore or oil & gas sites across the UAE and the GCC, as well as lighting contractors.
Benefits
- ICAO compliance: built to ICAO Annex 14, Vol. I and Vol. II, and IEC TS 61827; intensity meets ICAO Annex 14, Vol. II, fig. 5-12, illustration 4.
- Very low profile: just 25 mm high, keeping the surface flat and safe for helicopter manoeuvres.
- Low consumption: only 8.4 W, with high-power LEDs and an estimated lifetime of 100,000 hours.
- Dimmable: three intensity steps (100%, 30%, 10%) when supplied from a controller (48 V DC or 1.4 A CC).
- Built for harsh climates: IP68, rated from -55 °C to +55 °C, 0-100% humidity, salt-mist tested, UV protected, with anti-condensation valve.
- No-drill installation: integrated gel-filled junction box and surface cabling inside an aluminium profile.
Technical specifications
- Ordering code: AL-071-04-WH-FD
- Light colour: white, steady
- Horizontal output: 360°
- Intensity levels: 100%, 30%, 10% (48 V DC or 1.4 A CC versions)
- Power consumption: 8.4 W
- Power supply: 48 V DC from controller, dimmable; 90-230 V, 50/60 Hz, non-dimmable; 1.4 A CC, dimmable (internal bypass + SPD)
- Degree of protection: IP68
- Operating temperature: -55 °C to +55 °C
- Humidity: 0-100%
- Salt-mist testing: IEC 60068-2-11 and IEC 60068-2-25
- Dimensions: 405 × 200 mm, height 25 mm
- Weight: 2.5 kg
- Electrical connection: integrated gel-filled junction box (201-2593)
- Estimated LED lifetime: 100,000 hours
- Trichromatic coordinates: x = 0.347; y = 0.370; z = 0.283
- Intensity at 0° (required / measured min.): 10 / 40.3 cd
- Intensity at 3° (required / measured min.): 100 / 104 cd
- Intensity at 10° (required / measured min.): 100 / 158 cd
- Intensity at 20° (required / measured min.): 100 / 209 cd
- Intensity at 25° (required / measured min.): 50 / 223 cd
- Intensity at 30° (required / measured min.): 10 / 196 cd
Standards and compliance
- ICAO Annex 14, Vol. I – Aerodromes
- ICAO Annex 14, Volume II – Heliports
- IEC TS 61827 – Electrical installations for lighting and beaconing of aerodromes; characteristics of inset and elevated luminaires
- ICAO Annex 14, Vol. II, fig. 5-12, illustration 4 – light intensity
- Colour compliant with ICAO Annex 14, Vol. I, fig. A1-1b (solid-state aeronautical ground lights)
- Salt-mist testing: IEC 60068-2-11 and IEC 60068-2-25
Applications and installation
The FD version has an integrated gel-filled junction box (gelbox, code 201-2593) and is designed for existing platforms where drilling is not possible: the cable runs on the surface inside an aluminium cable protection profile (AL-119-AX, 2.2 kg/m) and is routed through a channel outside the heliport area. The light and the cable protection are fixed to the metal platform with M10 welded bolts or into M10 threaded holes.
Power supply options: 48 V DC from controller with 3-core cable (V+, V-, dimming), 230 V AC directly from mains (live, neutral, ground) or 1.4 A CC from controller with 2-core cable. Options: 1 m or 2 m cable, chrome-plated, stainless steel or plastic cable gland, standard case or case under the light connected with a short cable, junction box with simple terminals or with terminals, varistor and fuse, white, white + IR or IR LEDs, snow plug protection. Accessory: aluminium cable protection (AL-119-AX). For other mounting situations, the standard (F) version, with connections under the platform is also available. Designed and manufactured in Europe.
Frequently asked questions: Flat FATO / Aiming FD
When should I choose the FD version?
When the existing platform cannot be drilled and there is no access under the surface: the cable runs on the surface, protected by the AL-119-AX aluminium profile.
How is it fixed to the platform?
The light and the cable protection are fixed with M10 welded bolts on the metal platform or into M10 threaded holes.
Is the intensity adjustable?
Yes, in three steps (100%, 30%, 10%) when supplied from a controller at 48 V DC or 1.4 A CC; the 90-230 V version is non-dimmable.
Ordering and support
Price on request. The EcoSolaris team in Dubai helps you choose the right configuration (power supply, mounting, colour, accessories) and sends a formal quotation.
Only logged in customers who have purchased this product may leave a review.
Download the full technical datasheet — English or Arabic:
📄 Technical datasheet (EN, PDF)📄 النشرة الفنية (عربي، PDF)
Price on request · Photometric files and installation drawings on request: [email protected] · WhatsApp




Reviews
There are no reviews yet.