Heliport Flat FATO / Aiming LED Light, 8.4 W

Request a quote Request a quote

🚚
DHL Express → UAE: from ~130 AED · delivery ~2-3 days (est. weight 1 kg)
Exact cost calculated at checkout based on your address · estimate
Description

Heliport Flat FATO / Aiming LED Light, 8.4 W

The Flat FATO / Aiming light is a low-profile omnidirectional white light for marking the FATO (Final Approach and Take-Off area) perimeter and the aiming point. It is designed for projects where deep inset bases are impractical or too costly. It serves ground-level and rooftop heliports at hospitals, towers and offshore or oil & gas sites across the UAE and the GCC, as well as lighting contractors.

Benefits

  • ICAO compliance: built to ICAO Annex 14, Vol. I and Vol. II, and IEC TS 61827; intensity meets ICAO Annex 14, Vol. II, fig. 5-12, illustration 4.
  • Very low profile: 23.26 mm without cable gland, keeping the surface flat and safe for helicopter manoeuvres.
  • Low consumption: only 8.4 W, with high-power LEDs and an estimated lifetime of 100,000 hours.
  • Dimmable: three intensity steps (100%, 30%, 10%) when supplied from a controller (48 V DC or 1.4 A CC).
  • Built for harsh climates: IP68, rated from -55 °C to +55 °C, 0-100% humidity, salt-mist tested, UV protected, with anti-condensation valve.
  • Mounts on any hard surface: concrete, asphalt or metallic structures.

Technical specifications

  • Ordering code: AL-071-04-WH-F
  • Light colour: white, steady
  • Horizontal output: 360°
  • Intensity levels: 100%, 30%, 10% (48 V DC or 1.4 A CC versions)
  • Power consumption: 8.4 W
  • Power supply: 48 V DC from controller, dimmable; 90-230 V, 50/60 Hz, non-dimmable; 1.4 A CC, dimmable (internal bypass + SPD)
  • Degree of protection: IP68
  • Operating temperature: -55 °C to +55 °C
  • Humidity: 0-100%
  • Salt-mist testing: IEC 60068-2-11 and IEC 60068-2-25
  • Diameter: 200 mm
  • Height: 23.26 mm without cable gland; 44 mm with cable gland
  • Weight: 1.5 kg
  • Electrical connection: pre-cabled fixture + AL-139-AX metallic junction box
  • Estimated LED lifetime: 100,000 hours
  • Trichromatic coordinates: x = 0.347; y = 0.370; z = 0.283
  • Intensity at 0° (required / measured min.): 10 / 40.3 cd
  • Intensity at 3° (required / measured min.): 100 / 104 cd
  • Intensity at 10° (required / measured min.): 100 / 158 cd
  • Intensity at 20° (required / measured min.): 100 / 209 cd
  • Intensity at 25° (required / measured min.): 50 / 223 cd
  • Intensity at 30° (required / measured min.): 10 / 196 cd

Standards and compliance

  • ICAO Annex 14, Vol. I – Aerodromes
  • ICAO Annex 14, Volume II – Heliports
  • IEC TS 61827 – Electrical installations for lighting and beaconing of aerodromes; characteristics of inset and elevated luminaires
  • ICAO Annex 14, Vol. II, fig. 5-12, illustration 4 – light intensity
  • Colour compliant with ICAO Annex 14, Vol. I, fig. A1-1b (solid-state aeronautical ground lights)
  • Salt-mist testing: IEC 60068-2-11 and IEC 60068-2-25

Applications and installation

The F version mounts on any hard flat surface (concrete, asphalt, metallic structures); the pre-cabled fixture has a sufficiently long cable routed through a channel outside the heliport area and connected via a metallic junction box (AL-139-AX). It suits elevated heliports with space under the platform for electrical connections. The light fixes to hard flat surfaces: concrete, asphalt or metallic structures.

Power supply options: 48 V DC from controller with 3-core cable (V+, V-, dimming), 230 V AC directly from mains (live, neutral, ground) or 1.4 A CC from controller with 2-core cable. Options: 1 m or 2 m cable, chrome-plated, stainless steel or plastic cable gland, standard case or case under the light connected with a short cable, junction box with simple terminals or with terminals, varistor and fuse, white, white + IR or IR LEDs, snow plug protection. Accessory: metallic electrical junction box (AL-139-AX). For other mounting situations, the FD version, with integrated junction box and surface cabling is also available. Designed and manufactured in Europe.

Frequently asked questions: Flat FATO / Aiming

Which surfaces can it be mounted on?

Any hard flat surface: concrete, asphalt or metallic structures.

How is it connected?

The fixture is pre-cabled with a sufficiently long cable, routed through a channel outside the heliport area and connected in an AL-139-AX metallic junction box.

Is the intensity adjustable?

Yes, in three steps (100%, 30%, 10%) when supplied from a controller at 48 V DC or 1.4 A CC; the 90-230 V version is non-dimmable.

Ordering and support

Price on request. The EcoSolaris team in Dubai helps you choose the right configuration (power supply, mounting, colour, accessories) and sends a formal quotation.

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shipping & Delivery
Datasheets

Download the full technical datasheet — English or Arabic:

📄 Technical datasheet (EN, PDF)📄 النشرة الفنية (عربي، PDF)

Price on request · Photometric files and installation drawings on request: [email protected] · WhatsApp