Flat Taxiway LED Heliport Light, Blue, 3.15 W
Request a quote Request a quote
Flat Taxiway LED Heliport Light, Blue, 3.15 W
The Flat Taxiway light marks helicopter ground-taxi routes in blue between the landing area and hangars or parking stands. Its very low housing is no obstacle for helicopter wheels, and the fixture mounts on any hard flat surface. It is the right choice for elevated heliports on hospitals, towers and industrial sites where cabling can be run beneath the deck.
Benefits
- Very low profile: only 23.26 mm high without cable gland, so helicopter wheels roll over freely.
- Low consumption: 3.15 W with high-power LEDs and an estimated lifetime of 100,000 hours.
- Three intensity steps: 100%, 30% and 10% when fed from a controller (48 VDC or 1.4 A CC).
- Built for harsh climates: IP68, rated from -55 °C to +55 °C, 0–100% humidity and salt-mist tested – suited to hot, humid and coastal sites.
- Easy maintenance: lightweight aluminium alloy body, hardened glass and stainless steel fasteners.
Technical specifications
- Ordering code: AL-072-03-BL-F
- Application: heliport taxiway lights
- Light colour: Blue
- Power consumption: 3.15 W
- 48 VDC supply: from controller, dimmable 100%, 30%, 10%
- Mains supply: 90–230 V, 50/60 Hz, non-dimmable
- Constant-current supply: 1.4 A CC, dimmable 100%, 30%, 10% (internal bypass + SPD)
- Horizontal output: 360°
- Intensity 0°–6° (required / measured): min. 2 cd / 4.3 cd
- Intensity above 6° (required / measured): min. 0.2 cd / 10.6 cd
- Chromaticity coordinates: x = 0.135; y = 0.056
- Diameter: 200 mm
- Height: 23.26 mm without cable gland / 44 mm with cable gland
- Weight: 1.5 kg
- Degree of protection: IP68
- Operating temperature: -55 °C to +55 °C
- Humidity: 0–100%
- Estimated LED lifetime: 100,000 h
- Mounting surfaces: any hard flat surface: concrete, asphalt, metal structures
- Electrical connection: pre-cabled fixture + metallic junction box AL-139-AX
Standards and compliance
- ICAO Annex 14, Volume I – Aerodromes (design and operations)
- ICAO Annex 14, Volume II – Heliports
- IEC TS 61827 – Electrical installations for lighting and beaconing of aerodromes; characteristics of inset and elevated luminaires used on aerodromes and heliports
- Salt mist tested (Ka test) according to IEC 60068-2-11 and IEC 60068-2-25
- Chromaticity coordinates within the colour range required by ICAO Annex 14, Vol. I, fig. A1-1b (solid-state aeronautical ground lights)
Applications and installation
The light mounts on concrete, asphalt or metal structures. It is supplied pre-cabled with a cable long enough to be routed through a channel outside the heliport area and connected in a metallic junction box AL-139-AX. Power options: 48 VDC from a controller (3-core cable with dimming wire), 90–230 V directly from the mains, or 1.4 A CC from a series circuit (CC = constant current, with internal bypass and SPD surge protection). Options include 1 m or 2 m cable, chrome-plated, stainless steel or plastic cable gland, junction box with simple terminals or with varistor and fuse, and snow plug. For decks that cannot be drilled, the Flat Taxiway FD version keeps cables protected on the surface. Designed and manufactured in Europe.
Frequently asked questions: Flat Taxiway
What is a heliport taxiway light?
It marks the ground-taxi route of a helicopter between the landing area and hangars or parking stands; ICAO specifies blue lights for this purpose.
When should I choose the FD version?
The standard version needs access beneath the deck for cabling. If the deck is solid and cannot be drilled, the FD version has an integrated junction box and cables protected in aluminium profiles on top of the surface.
Is the light dimmable?
Yes, in three steps (100%, 30%, 10%) when powered at 48 VDC from a controller or at 1.4 A CC. The direct mains version is non-dimmable.
Ordering and support
Price on request. The EcoSolaris team in Dubai helps you choose the right configuration (power supply, mounting, colour, accessories) and sends a formal quotation.
Only logged in customers who have purchased this product may leave a review.
Download the full technical datasheet — English or Arabic:
📄 Technical datasheet (EN, PDF)📄 النشرة الفنية (عربي، PDF)
Price on request · Photometric files and installation drawings on request: [email protected] · WhatsApp




Reviews
There are no reviews yet.