Heliport Controller V3 – 8 Circuits, GSM Control, LCD
Request a quote Request a quote
Heliport Controller V3 – 8 Circuits, GSM Control, LCD
The Heliport Controller V3 powers, controls and monitors the lighting circuits and guidance systems of heliports and airports. It is designed for operators of hospital, rooftop, offshore and industrial helipads who want one unit for all lights and clear fault alarms.
Benefits
- One controller for the whole helipad: 8 independent circuits for inset or elevated lights, floodlights, wind direction indicator, beacon and guidance systems.
- The right output for each load: 48 V DC or 1.4 A constant current (max. 500 W, dimmable) and 230 V AC (max. 2000 W).
- Control from anywhere: front-panel buttons, RS485 console, Android app via GSM or pilot activation by radio (ARCAL).
- Faults never go unnoticed: automatic detection of failed lights and circuits, audible alarm and message to the maintenance number.
- ICAO-compliant beacon: beacon intensity follows automatically: 3%, 10%, 100%.
- Full electrical protection: EMI filter, SPD, short circuit, overload, overvoltage; IP65 and rated to +55 °C.
Technical specifications
- Ordering code: AL-078-AX
- Power supply: 110–240 V, 50/60 Hz
- Output circuits: 8 independent ON/OFF circuits, factory configurable
- 48 V DC output: max. 500 W per channel, dimmable
- 1.4 A constant current output: max. 500 W per channel, dimmable
- 230 V AC output: max. 2000 W per channel, non-dimmable
- Brightness steps: 10%, 30%, 100% (beacon: 3%, 10%, 100%)
- Modes: brightness, standby, total OFF, circuits ON/OFF
- Control: front-panel buttons, RS485 console, GSM (Android app), ARCAL
- LCD display: voltage, total power, brightness, system status, circuits, errors, GSM network, control rights
- Light fault detection: power change > 5 W between two readings – LCD message and beep
- Circuit fault detection: power change > 20 W between two readings – LCD message and beep
- Monitoring inputs: 3 dry contacts for APAPI, SAGA, HAPI
- Electrical protection class: Class I
- Protections: short circuit, overload, overvoltage, EMI filter, SPD
- Degree of protection: IP65
- Operating temperature: -20 °C to +55 °C
- Mounting: vertical, 4 × Φ8 mm holes on a flat surface
Standards and compliance
- ICAO Annex 14, Volume II – Heliports
- EMC emission: EN55032 (CISPR32) Class B, EN61000-3-2 Class A, EN61000-3-3, EAC TP TC 020
- EMC immunity: EN61000-4-2,3,4,5,6,8,11, EN55024 (light industry level, criteria A), EAC TP TC 020
Applications and installation
The controller is installed vertically on any flat surface through four Φ8 mm holes; grounding is mandatory for safety and for correct surge and EMI protection. 48 V DC outputs typically feed inset or elevated heliport lights and guidance systems, while 1.4 A series circuits suit long cable runs (airports, or controllers far from the helipad) without large voltage drops. 230 V AC outputs drive floodlights or the wind direction indicator; they switch off in standby and are not affected by brightness steps. Three dry-contact inputs read fault signals from APAPI, SAGA or HAPI units. Accessories: GSM module AL-117-AX, console controller AL-110-AX. Ideal for hospital and rooftop helipads, offshore and oil & gas helidecks in the UAE and GCC. Designed and manufactured in Europe.
Frequently asked questions: Heliport Controller V3
Can I control the lights from a phone?
Yes, with the GSM module AL-117-AX and the Android app: control all functions, request system status and receive fault messages on the maintenance number.
What happens to the beacon at low brightness steps?
At 10% system brightness the beacon runs at 3%; at 30% it runs at 10%; at 100% both are at full intensity (ref. ICAO 5.3.2.5).
How are faults detected?
Two consecutive power readings are compared: a difference above 5 W indicates a failed light, above 20 W a failed circuit; an LCD message and beep follow.
Ordering and support
Price on request. The EcoSolaris team in Dubai helps you choose the right configuration (power supply, mounting, colour, accessories) and sends a formal quotation.
Only logged in customers who have purchased this product may leave a review.
Download the full technical datasheet — English or Arabic:
📄 Technical datasheet (EN, PDF)📄 النشرة الفنية (عربي، PDF)
Price on request · Photometric files and installation drawings on request: [email protected] · WhatsApp




Reviews
There are no reviews yet.