Remote Console for Heliport Controller V3
Request a quote Request a quote
Remote Console for Heliport Controller V3
The Console Controller lets operators run the heliport lighting system from the tower or control room, while Controller V3 and the electrical cabinets stay in the technical room. It connects to the controller over a shielded RS485 cable and is intended for helipad operators at hospitals, high-rise towers, offshore and oil & gas sites, and for lighting contractors.
Benefits
- Remote operation: switch circuits and select brightness without going to the technical room.
- 8 independent circuits: each factory configurable for 48 V DC, 1.4 A constant current or 230 V AC.
- Three brightness steps: 10%, 30% and 100%, plus Standby and total OFF.
- Automatic diagnostics: alarm on a difference above 5 W (lamps) or 20 W (circuit) between two consecutive readings.
- Guidance system monitoring: 3 dry-contact inputs for APAPI, SAGA and HAPI failures.
Technical specifications
- Ordering code: AL-110-AX
- Compatibility: Heliport Controller V3
- Communication: RS485, via shielded cable
- Power supply: 110-240 V, 50/60 Hz
- Controlled circuits: 8 ON/OFF circuits, factory configurable
- 48 V DC circuit: max 500 W, dimmable
- 1.4 A constant-current circuit: max 500 W, dimmable
- 230 V AC circuit: max 2000 W, not dimmable
- Brightness steps: 10%, 30%, 100%
- Operating modes: Standby, total OFF, per-circuit ON/OFF
- LCD display: voltage, total power (W), brightness level, system status, circuits ON/OFF, errors, GSM network, control rights
- Lamp failure detection: > 5 W difference between two consecutive readings – LCD message and beep
- Circuit failure detection: > 20 W difference between two consecutive readings – LCD message and beep
- Monitoring inputs: 3 independent dry contacts (APAPI, SAGA, HAPI)
- Housing: powder-coated metal, grey
- Cable gland: nickel-plated brass
Standards and compliance
- ICAO Annex 14, Volume II – Heliports
- EMC emission: EN 55032 (CISPR 32) Class B, EN 61000-3-2 Class A, EN 61000-3-3, EAC TP TC 020
- EMC immunity: EN 61000-4-2, 3, 4, 5, 6, 8, 11; EN 55024 (light industry level, criteria A); EAC TP TC 020
Applications and installation
The console is compatible with Heliport Controller V3 and is connected to it by shielded cable only (RS485). It is powered from 110-240 V, 50/60 Hz. It can control circuits for TLOF (touchdown and lift-off area), FATO (final approach and take-off area), aiming point, floodlight, approach, taxiway and beacon lights. Its 3 dry-contact inputs monitor visual guidance systems such as HAPI (helicopter approach path indicator), APAPI or SAGA. Designed and manufactured in Europe.
Frequently asked questions: Console Controller
Which controller does this console work with?
The Console Controller (AL-110-AX) is compatible with Heliport Controller V3. For Controller V4 there is a dedicated Console Controller V4.
How does the console report a failed lamp?
If the total power differs by more than 5 W between two consecutive readings, the console shows a message on the LCD and beeps; above 20 W it reports a possible circuit failure.
What power supply does it need?
Mains power, 110-240 V, 50/60 Hz.
Ordering and support
Price on request. The EcoSolaris team in Dubai helps you choose the right configuration (power supply, mounting, colour, accessories) and sends a formal quotation.
Only logged in customers who have purchased this product may leave a review.
Download the full technical datasheet — English or Arabic:
📄 Technical datasheet (EN, PDF)📄 النشرة الفنية (عربي، PDF)
Price on request · Photometric files and installation drawings on request: [email protected] · WhatsApp




Reviews
There are no reviews yet.