Energy Meter ET340 – 3 phase – max 65A/phase
381,22 AEDEnergy Meter is typically used in an Energy Storage System, to measure the power and energy of the entire application at the distribution box and minimises energy import or export to the grid. They can also be used to measure the output of a PV inverter or AC loads and display the data on GX devices such as the Cerbo GX or Ekrano GX and the VRM Portal.
Energy Meter VM-3P75CT
830,53 AEDEnergy Meter is typically used in an Energy Storage System, to measure the power and energy of the entire application at the distribution box and minimises energy import or export to the grid. They can also be used to measure the output of a PV inverter or AC loads and display the data on GX devices such as the Cerbo GX or Ekrano GX and the VRM Portal.
Filax-2 230V/50Hz-240V/60Hz
1.320,68 AEDThe Filax has been designed to switch sensitive loads, such as computers or modern entertainment equipment from one AC source to another. The priority source typically is the mains, a generator or shore power. The alternate source typically is an inverter. With its switching time of less than 20 milliseconds, sensitive loads will continue to operate without disruption. The Filax is not intended to supply high power household equipment like washing machines or electric motors.
Fronius – 6x 15A Fuses on DC+
90,77 AEDThe integrated fuse holders enable fuse based overcurrent protection to be implemented directly within the inverter. When ordering your inverters, you can choose whether the positive pole is populated with six 15 A / 1,000 V fuses (supplied by Littelfuse/SIBA/Bussmann) or with bolts. The fuse holders on the negative pole are normally equipped with bolts. The types of fuse used have been specially developed to protect photovoltaic modules and operate to up to 20 kA. Furthermore, the plug-in modules allow individual fuses to be quickly replaced in the event of a fault.
Fronius – DC Connector Kit GEN24
167,93 AEDThe DC Connector Kit GEN24 has been specially developed for use with the Fronius Primo and Symo GEN24. The terminals used are safe to touch and no ferrules are needed.
Fronius – DC SPD Type 1+2 GEN24
907,68 AEDThe surge protection device type 1+2 for direct and indirect lightning strikes is suitable for use with the Fronius Symo GEN24 and Fronius Primo GEN24 (all power categories) inverters and therefore fulfils the standard requirement of installing a DC fuse near the inverter).
Fronius – Pair of MC4 Solar connectors
27,23 AEDThe MC4 cable option enables inverters to be cabled-up quickly and easily, which in turn allows a rapid PV system connection process. The option can be ordered on an individual basis per string (2 to 6 strings) and has been specially designed for use with Symo 10.0 – 20.0 kW and Eco inverters. The inverters are delivered with the installed MC4 cable option*). *) The option must be ordered at the same time as the inverter. A retrofit version is not available. Original MC4 Multi-Contact PV coupling plugs and sockets must also be used for connecting the PV generator.
Fronius Ambient temperature sensor
131,62 AEDAmbient temperature sensor – Integrating sensors into a PV system enables additional measured values, such as irradiation and ambient temperature, to mention just a couple, to be recorded.
Fronius Datamanager 2.0
1.134,60 AEDThe Fronius Datamanager is the communications centre for Fronius inverters in every type of application. Whenever it is connected to the internet via a LAN or WLAN, the Datamanager sends the PV system values directly to the online portal. This provides you with an overview of how the system is operating at all times. The Datamanager enables inverters to be connected directly to the internet via WLAN. Furthermore, optimum system monitoring and configuration of the Datamanager can be carried out via the dedicated website on the Datamanager’s integrated web server. The integrated Modbus RTU SunSpec, Modbus TCP SunSpec and Fronius Solar API (JSON for actual values) interfaces allow Fronius inverters to be seamlessly linked to third-party systems and run in parallel with Fronius Solar.web.
Fronius Datamanager Box 2.0
1.756,37 AEDThe Fronius Datamanager is the communications centre for Fronius inverters in every type of application. Whenever it is connected to the internet via a LAN or WLAN, the Datamanager sends the PV system values directly to the online portal. This provides you with an overview of how the system is operating at all times. The Datamanager enables inverters to be connected directly to the internet via WLAN. Furthermore, optimum system monitoring and configuration of the Datamanager can be carried out via the dedicated website on the Datamanager’s integrated web server. The integrated Modbus RTU SunSpec, Modbus TCP SunSpec and Fronius Solar API (JSON for actual values) interfaces allow Fronius inverters to be seamlessly linked to third-party systems and run in parallel with Fronius Solar.web.
Fronius DC Connector KIT 25
181,53 AEDFronius Symo inverters can be conveniently fitted and ordered with various options such as overvoltage protection, a DC connector kit or an MC4 solar connector.
Please choose your desired product.
Fronius DC Connector KIT 35
204,23 AEDFronius Symo inverters can be conveniently fitted and ordered with various options such as overvoltage protection, a DC connector kit or an MC4 solar connector.
Please choose your desired product.
Fronius Eco 25.0-3-S WLAN/LAN/Webserver
12.843,72 AEDThe three-phase Fronius Eco in power categories 25.0 and 27.0 kW perfectly meets all the requirements of large-scale installations. Thanks to its light weight and SnapINverter mounting system, this transformerless device can be installed quickly and easily either indoors or outdoors. This inverter series sets new standards with its IP 66 protection class. In addition, its integrated all-pole string fuse holders and optional DC fuse mean that string collection boxes are no longer required.
Fronius Eco 27.0-3-S WLAN/LAN/Webserver
13.161,40 AEDThe three-phase Fronius Eco in power categories 25.0 and 27.0 kW perfectly meets all the requirements of large-scale installations. Thanks to its light weight and SnapINverter mounting system, this transformerless device can be installed quickly and easily either indoors or outdoors. This inverter series sets new standards with its IP 66 protection class. In addition, its integrated all-pole string fuse holders and optional DC fuse mean that string collection boxes are no longer required.
Fronius Irradiation sensor
635,38 AEDIrradiation sensor – Integrating sensors into a PV system enables additional measured values, such as irradiation and ambient temperature, to mention just a couple, to be recorded.
Fronius Module temperature sensor
653,53 AEDModule temperature sensor – Integrating sensors into a PV system enables additional measured values, such as irradiation and ambient temperature, to mention just a couple, to be recorded.
Fronius Ohmpilot
3.621,66 AEDThe Fronius Ohmpilot is a consumption regulator designed to use excess solar power to heat water. Thanks to the continuously adjustable regulation from 0 to 9 kW, surplus PV current can be put to highly efficient use and fed to the consumers in the household. The Fronius Ohmpilot is primarily used to intelligently control heating elements for providing hot water in boilers and buffer storage tanks, but can also be used for infrared heating or towel radiators. Solar power can thus provide a family home with average levels of water consumption with most of their hot water during spring and summer. The result is maximum self-consumption, a reduction in the household’s CO2 emissions and less wear on the building’s main heating system during the summer months.
Fronius Primo 3.0-1 WLAN/LAN/Webserver
5.128,41 AEDWith power categories ranging from 3.0 to 8.2 kW, the Fronius Primo perfectly complements the SnapINverter generation. This single-phase, transformerless device is the ideal inverter for private households. Its innovative SuperFlex Design provides maximum flexibility in system design, while the SnapINverter mounting system makes installation and maintenance as easy as possible. The communication package included as standard with WLAN, energy management, numerous interfaces, and much more besides, makes the Fronius Primo a communicative inverter for owner-occupiers.
Fronius Primo 3.6-1 WLAN/LAN/Webserver
5.446,10 AEDWith power categories ranging from 3.0 to 8.2 kW, the Fronius Primo perfectly complements the SnapINverter generation. This single-phase, transformerless device is the ideal inverter for private households. Its innovative SuperFlex Design provides maximum flexibility in system design, while the SnapINverter mounting system makes installation and maintenance as easy as possible. The communication package included as standard with WLAN, energy management, numerous interfaces, and much more besides, makes the Fronius Primo a communicative inverter for owner-occupiers.
Fronius Primo 4.0-1 WLAN/LAN/Webserver
5.673,01 AEDWith power categories ranging from 3.0 to 8.2 kW, the Fronius Primo perfectly complements the SnapINverter generation. This single-phase, transformerless device is the ideal inverter for private households. Its innovative SuperFlex Design provides maximum flexibility in system design, while the SnapINverter mounting system makes installation and maintenance as easy as possible. The communication package included as standard with WLAN, energy management, numerous interfaces, and much more besides, makes the Fronius Primo a communicative inverter for owner-occupiers.
Fronius Primo 4.6-1 WLAN/LAN/Webserver
5.899,94 AEDWith power categories ranging from 3.0 to 8.2 kW, the Fronius Primo perfectly complements the SnapINverter generation. This single-phase, transformerless device is the ideal inverter for private households. Its innovative SuperFlex Design provides maximum flexibility in system design, while the SnapINverter mounting system makes installation and maintenance as easy as possible. The communication package included as standard with WLAN, energy management, numerous interfaces, and much more besides, makes the Fronius Primo a communicative inverter for owner-occupiers.
Fronius Primo 5.0-1 WLAN/LAN/Webserver
6.263,01 AEDWith power categories ranging from 3.0 to 8.2 kW, the Fronius Primo perfectly complements the SnapINverter generation. This single-phase, transformerless device is the ideal inverter for private households. Its innovative SuperFlex Design provides maximum flexibility in system design, while the SnapINverter mounting system makes installation and maintenance as easy as possible. The communication package included as standard with WLAN, energy management, numerous interfaces, and much more besides, makes the Fronius Primo a communicative inverter for owner-occupiers.
Fronius Primo 6.0-1 WLAN/LAN/Webserver
7.261,46 AEDWith power categories ranging from 3.0 to 8.2 kW, the Fronius Primo perfectly complements the SnapINverter generation. This single-phase, transformerless device is the ideal inverter for private households. Its innovative SuperFlex Design provides maximum flexibility in system design, while the SnapINverter mounting system makes installation and maintenance as easy as possible. The communication package included as standard with WLAN, energy management, numerous interfaces, and much more besides, makes the Fronius Primo a communicative inverter for owner-occupiers.
Fronius Primo 8.2-1 WLAN/LAN/Webserver
8.396,06 AEDWith power categories ranging from 3.0 to 8.2 kW, the Fronius Primo perfectly complements the SnapINverter generation. This single-phase, transformerless device is the ideal inverter for private households. Its innovative SuperFlex Design provides maximum flexibility in system design, while the SnapINverter mounting system makes installation and maintenance as easy as possible. The communication package included as standard with WLAN, energy management, numerous interfaces, and much more besides, makes the Fronius Primo a communicative inverter for owner-occupiers.
Fronius Primo GEN24 3.0
5.400,72 AEDOur single-phase Fronius Primo GEN24 inverter is the heart of private photovoltaic systems.
The Fronius GEN24 is equipped with PV Point, an integrated basic backup power function that supplies backup power to connected devices via a protected socket (as long as the sun is shining).
Fronius Primo GEN24 3.6
5.718,41 AEDOur single-phase Fronius Primo GEN24 inverter is the heart of private photovoltaic systems.
The Fronius GEN24 is equipped with PV Point, an integrated basic backup power function that supplies backup power to connected devices via a protected socket (as long as the sun is shining).
Fronius Primo GEN24 4.0
5.990,71 AEDOur single-phase Fronius Primo GEN24 inverter is the heart of private photovoltaic systems.
The Fronius GEN24 is equipped with PV Point, an integrated basic backup power function that supplies backup power to connected devices via a protected socket (as long as the sun is shining).
