Heliport Flat Alignment LED Light, 6.3 W

Request a quote Request a quote

🚚
DHL Express → UAE: from ~130 AED · delivery ~2-3 days (est. weight 1 kg)
Exact cost calculated at checkout based on your address · estimate
Description

Heliport Flat Alignment LED Light, 6.3 W

The Flat Alignment light is a key visual aid for guiding pilots along the correct approach and departure paths (flight path alignment guidance). Its very low profile keeps the surface completely flat with no risk to helicopter operations, while connections are made under the platform or via an external junction box. It serves rooftop and ground-level heliports at hospitals, towers and offshore or oil & gas sites across the UAE and the GCC, as well as contractors.

Benefits

  • ICAO compliance: built to ICAO Annex 14, Vol. I and Vol. II, and IEC TS 61827; intensity meets ICAO Annex 14, Vol. II, fig. 5-12, illustration 5.
  • Very low profile: 23.26 mm without cable gland, keeping the surface flat and safe for helicopter manoeuvres.
  • Low consumption: only 6.3 W, with high-power LEDs and an estimated lifetime of 100,000 hours.
  • Dimmable: three intensity steps (100%, 30%, 10%) when supplied from a controller (48 V DC or 1.4 A CC).
  • Built for harsh climates: IP68, rated from -55 °C to +55 °C, 0-100% humidity, salt-mist tested, UV protected, with anti-condensation valve.
  • Mounts on any hard surface: concrete, asphalt or metallic structures.

Technical specifications

  • Ordering code: AL-075-03-WH-F
  • Light colour: white, steady
  • Horizontal output: 360°
  • Intensity levels: 100%, 30%, 10% (48 V DC or 1.4 A CC versions)
  • Power consumption: 6.3 W
  • Power supply: 48 V DC from controller, dimmable; 90-230 V, 50/60 Hz, non-dimmable; 1.4 A CC, dimmable (internal bypass + SPD)
  • Degree of protection: IP68
  • Operating temperature: -55 °C to +55 °C
  • Humidity: 0-100%
  • Salt-mist testing: IEC 60068-2-11 and IEC 60068-2-25
  • Diameter: 200 mm
  • Height: 23.26 mm without cable gland; 44 mm with cable gland
  • Weight: 1.5 kg
  • Electrical connection: pre-cabled fixture + AL-139-AX metallic junction box
  • Estimated LED lifetime: 100,000 hours
  • Trichromatic coordinates: x = 0.347; y = 0.370; z = 0.283
  • Intensity at 2°-5° (required / measured min.): 15 / 28.5 cd
  • Intensity at 5°-10° (required / measured min.): 30 / 31.5 cd
  • Intensity at 10°-13° (required / measured min.): 15 / 36.5 cd
  • Intensity at 13°-20° (required / measured min.): 8 / 47 cd
  • Intensity at 20°-90° (required / measured min.): 3 / 30.9 cd

Standards and compliance

  • ICAO Annex 14, Vol. I – Aerodromes
  • ICAO Annex 14, Volume II – Heliports
  • IEC TS 61827 – Electrical installations for lighting and beaconing of aerodromes; characteristics of inset and elevated luminaires
  • ICAO Annex 14, Vol. II, fig. 5-12, illustration 5 – light intensity
  • Colour compliant with ICAO Annex 14, Vol. I, fig. A1-1b (solid-state aeronautical ground lights)
  • Salt-mist testing: IEC 60068-2-11 and IEC 60068-2-25

Applications and installation

The F version mounts on any hard flat surface (concrete, asphalt, metallic structures); the pre-cabled fixture has a sufficiently long cable routed through a channel outside the heliport area and connected via a metallic junction box (AL-139-AX). It suits elevated heliports with space under the platform for electrical connections. The light fixes to hard flat surfaces: concrete, asphalt or metallic structures.

Power supply options: 48 V DC from controller with 3-core cable (V+, V-, dimming), 230 V AC directly from mains (live, neutral, ground) or 1.4 A CC from controller with 2-core cable. Options: 1 m or 2 m cable, chrome-plated, stainless steel or plastic cable gland, standard case or case under the light connected with a short cable, junction box with simple terminals or with terminals, varistor and fuse, white, white + IR or IR LEDs, snow plug protection. Accessory: metallic electrical junction box (AL-139-AX). For other mounting situations, the FD version, with integrated junction box and surface cabling is also available. Designed and manufactured in Europe.

Frequently asked questions: Flat Alignment

Which surfaces can it be mounted on?

Any hard flat surface: concrete, asphalt or metallic structures.

How is it connected?

The fixture is pre-cabled with a sufficiently long cable, routed through a channel outside the heliport area and connected in an AL-139-AX metallic junction box.

Is the intensity adjustable?

Yes, in three steps (100%, 30%, 10%) when supplied from a controller at 48 V DC or 1.4 A CC; the 90-230 V version is non-dimmable.

Ordering and support

Price on request. The EcoSolaris team in Dubai helps you choose the right configuration (power supply, mounting, colour, accessories) and sends a formal quotation.

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shipping & Delivery
Datasheets

Download the full technical datasheet — English or Arabic:

📄 Technical datasheet (EN, PDF)📄 النشرة الفنية (عربي، PDF)

Price on request · Photometric files and installation drawings on request: [email protected] · WhatsApp