Heliport Flat Alignment FD LED Light, 6.3 W

Request a quote Request a quote

🚚
DHL Express → UAE: from ~130 AED · delivery ~2-3 days (est. weight 1 kg)
Exact cost calculated at checkout based on your address · estimate
Description

Heliport Flat Alignment FD LED Light, 6.3 W

The Flat Alignment FD light is a key visual aid for guiding pilots along the correct approach and departure paths (flight path alignment guidance). The FD version has an integrated junction box and its cables are protected by surface-mounted aluminium profiles – the right choice for existing platforms where drilling is not possible. It serves rooftop and ground-level heliports at hospitals, towers and offshore or oil & gas sites across the UAE and the GCC, as well as contractors.

Benefits

  • ICAO compliance: built to ICAO Annex 14, Vol. I and Vol. II, and IEC TS 61827; intensity meets ICAO Annex 14, Vol. II, fig. 5-12, illustration 5.
  • Very low profile: just 25 mm high, keeping the surface flat and safe for helicopter manoeuvres.
  • Low consumption: only 6.3 W, with high-power LEDs and an estimated lifetime of 100,000 hours.
  • Dimmable: three intensity steps (100%, 30%, 10%) when supplied from a controller (48 V DC or 1.4 A CC).
  • Built for harsh climates: IP68, rated from -55 °C to +55 °C, 0-100% humidity, salt-mist tested, UV protected, with anti-condensation valve.
  • No-drill installation: integrated gel-filled junction box and surface cabling inside an aluminium profile.

Technical specifications

  • Ordering code: AL-075-03-WH-FD
  • Light colour: white, steady
  • Horizontal output: 360°
  • Intensity levels: 100%, 30%, 10% (48 V DC or 1.4 A CC versions)
  • Power consumption: 6.3 W
  • Power supply: 48 V DC from controller, dimmable; 90-230 V, 50/60 Hz, non-dimmable; 1.4 A CC, dimmable (internal bypass + SPD)
  • Degree of protection: IP68
  • Operating temperature: -55 °C to +55 °C
  • Humidity: 0-100%
  • Salt-mist testing: IEC 60068-2-11 and IEC 60068-2-25
  • Dimensions: 405 × 200 mm, height 25 mm
  • Weight: 2.5 kg
  • Electrical connection: integrated gel-filled junction box (201-2593)
  • Estimated LED lifetime: 100,000 hours
  • Trichromatic coordinates: x = 0.347; y = 0.370; z = 0.283
  • Intensity at 2°-5° (required / measured min.): 15 / 28.5 cd
  • Intensity at 5°-10° (required / measured min.): 30 / 31.5 cd
  • Intensity at 10°-13° (required / measured min.): 15 / 36.5 cd
  • Intensity at 13°-20° (required / measured min.): 8 / 47 cd
  • Intensity at 20°-90° (required / measured min.): 3 / 30.9 cd

Standards and compliance

  • ICAO Annex 14, Vol. I – Aerodromes
  • ICAO Annex 14, Volume II – Heliports
  • IEC TS 61827 – Electrical installations for lighting and beaconing of aerodromes; characteristics of inset and elevated luminaires
  • ICAO Annex 14, Vol. II, fig. 5-12, illustration 5 – light intensity
  • Colour compliant with ICAO Annex 14, Vol. I, fig. A1-1b (solid-state aeronautical ground lights)
  • Salt-mist testing: IEC 60068-2-11 and IEC 60068-2-25

Applications and installation

The FD version has an integrated gel-filled junction box (gelbox, code 201-2593) and is designed for existing platforms where drilling is not possible: the cable runs on the surface inside an aluminium cable protection profile (AL-119-AX, 2.2 kg/m) and is routed through a channel outside the heliport area. The light and the cable protection are fixed to the metal platform with M10 welded bolts or into M10 threaded holes.

Power supply options: 48 V DC from controller with 3-core cable (V+, V-, dimming), 230 V AC directly from mains (live, neutral, ground) or 1.4 A CC from controller with 2-core cable. Options: 1 m or 2 m cable, chrome-plated, stainless steel or plastic cable gland, standard case or case under the light connected with a short cable, junction box with simple terminals or with terminals, varistor and fuse, white, white + IR or IR LEDs, snow plug protection. Accessory: aluminium cable protection (AL-119-AX). For other mounting situations, the standard (F) version, with connections under the platform is also available. Designed and manufactured in Europe.

Frequently asked questions: Flat Alignment FD

When should I choose the FD version?

When the existing platform cannot be drilled and there is no access under the surface: the cable runs on the surface, protected by the AL-119-AX aluminium profile.

How is it fixed to the platform?

The light and the cable protection are fixed with M10 welded bolts on the metal platform or into M10 threaded holes.

Is the intensity adjustable?

Yes, in three steps (100%, 30%, 10%) when supplied from a controller at 48 V DC or 1.4 A CC; the 90-230 V version is non-dimmable.

Ordering and support

Price on request. The EcoSolaris team in Dubai helps you choose the right configuration (power supply, mounting, colour, accessories) and sends a formal quotation.

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shipping & Delivery
Datasheets

Download the full technical datasheet — English or Arabic:

📄 Technical datasheet (EN, PDF)📄 النشرة الفنية (عربي، PDF)

Price on request · Photometric files and installation drawings on request: [email protected] · WhatsApp