Up&Down Bidirectional LED Wall Light 2×7.5W Outdoor

Up&Down Bidirectional LED Wall Light 2×7.5W Outdoor

The Up&Down bidirectional LED wall light is the higher-output model in the exterior wall range. With 2×7.5 W and a wide optic, it covers generous areas of facade both above and below the mounting point. It is aimed at developers, contractors and building managers who want wall lighting that actually works, not only decorates.

Benefits

• Real usable output: 1652 lm from a compact body, enough to light a walking route along the wall.
• 110 lm/W efficacy: the LEDs turn 15 W into light with low losses, which keeps long-term running costs down.
• Wide optic: the upper and lower patches spread sideways and merge between fittings set well apart.
• Die-cast aluminium body: rigid, thermally efficient and resistant to the corrosion that coastal air causes on lesser housings.
• Sealed to IP65: dust, driving rain and facade washing do not reach the electronics.
• Integrated power supply: no separate driver in a junction box; the fitting wires straight to the supply.

Technical specifications of the Up&Down LED wall light

• Type: bidirectional LED wall light
• Mounting: surface-mounted on the wall, outdoor
• Housing material: die-cast aluminium
• Colour: black
• Power: 2×7.5 W
• Luminous flux: 1652 lm
• Luminous efficacy: 110 lm/W
• Optic: wide
• Colour temperature: 3000 K or 4000 K
• CRI: above 80
• Control: on/off
• Ingress protection: IP65
• Impact resistance: IK06
• Protection class: I
• Driver: included in the housing
• Adjustable: no
• Dimensions: 179 x 70 x 95 mm

Applications and installation

Fit the Up&Down wall light on house walls, on the facades of new apartment blocks, at office entrances and along covered walkways. The 1652 lm output also suits walls around car parks and access zones, where you need visibility rather than a purely decorative effect. Choose 3000 K for brick or timber facades and 4000 K for concrete, metal or glass. The fitting is class I, so run a protective conductor to it.

Frequently asked questions

How much wall does one fitting cover? The wide optic spreads 1652 lm into two broad cones. Spacing depends on wall height and the level you want; we can calculate it for you.

Does it survive rain and washdown? Yes. The fitting is rated IP65 and the die-cast aluminium housing is made for permanent outdoor mounting.

Can it be dimmed? The standard version is on/off. Dimming needs a separate system, which we discuss when quoting.