Inset Alignment LED Heliport Light, White, 6 W

Request a quote Request a quote

🚚
DHL Express → UAE: from ~130 AED · delivery ~2-3 days (est. weight 1 kg)
Exact cost calculated at checkout based on your address · estimate
Description

Inset Alignment LED Heliport Light, White, 6 W

The inset alignment light gives pilots precise directional guidance along the helicopter approach and departure path. It is installed flush with the heliport surface so it creates no obstacle, and its high-power LEDs have an estimated lifetime of 100,000 hours. It suits ground-level and elevated heliports on hospitals, towers, industrial and offshore sites.

Benefits

  • Precise guidance: marks the flight path direction, per ICAO Annex 14, Vol. II, fig. 5-11/6.
  • Flush installation: Ø153 mm inset body, no obstacles on the deck.
  • Low consumption: 6 W and an estimated LED lifetime of 100,000 hours.
  • Sealed and rugged: IPX8, rated from -55 °C to +55 °C, salt-mist tested – suited to hot, humid and coastal sites.
  • Configurable: 48 VDC, 90–230 V, 1.4 A CC or 700 mA supply, optional protections, EFLA connector.

Technical specifications

  • Ordering code: AL-089-03-WH
  • Application: flight path alignment guidance lights
  • Light colour: white
  • Power consumption: 6 W
  • 48 VDC supply: from controller, dimmable 100%, 30%, 10%
  • Mains supply: 90–230 V, 50/60 Hz, non-dimmable
  • Constant-current supply: 1.4 A CC, dimmable 100%, 30%, 10% (internal bypass + SPD)
  • Horizontal output: 360°
  • Photometry: per ICAO Annex 14, Vol. II, fig. 5-11/6
  • Diameter: 153 mm
  • Total height: 80 mm
  • Weight: 1.5 kg
  • Degree of protection: IPX8
  • Operating temperature: -55 °C to +55 °C
  • Estimated LED lifetime: 100,000 h
  • Electrical connection: pre-cabled with 0.5 m cable + IP68 junction box AL-107-AX

Standards and compliance

  • ICAO Annex 14, Volume I – Aerodromes (design and operations)
  • ICAO Annex 14, Volume II – Heliports
  • IEC TS 61827 – Electrical installations for lighting and beaconing of aerodromes; characteristics of inset and elevated luminaires used on aerodromes and heliports
  • Salt mist tested (Ka test)
  • Chromaticity within the range required by ICAO Annex 14, Vol. I, fig. A1-1-1b

Applications and installation

The light is supplied pre-cabled with a 0.5 m cable and connected through the IP68 junction box AL-107-AX. It mounts in the standard Φ160 mm shallow base AL-104-AX (with installation jig AL-108-AX), in the surface-mounted base AL-106-AX or in an 8” IEC shallow base with adapter ring AL-105-AX. Power: 48 VDC from a controller (3-core cable, dimmable 100% / 30% / 10%), 90–230 V mains (non-dimmable) or 1.4 A CC (constant current, with internal bypass and SPD); 700 mA constant current optional. Options include 0.3 / 1 / 2 m cable, bypass, varistor, reverse-polarity and fuse protection, white, white + IR or IR LEDs, silicone encapsulation and snow plug. Designed and manufactured in Europe.

Frequently asked questions: Inset Alignment Light

What do alignment lights do?

They show the pilot the preferred approach and departure direction, helping align the helicopter with the heliport flight path.

Which base does it fit?

The standard Φ160 mm shallow base AL-104-AX, the surface-mounted base AL-106-AX, or an 8” IEC shallow base with adapter ring AL-105-AX.

Can it run on a constant-current series circuit?

Yes, the 1.4 A CC version has internal bypass and surge protection; a 700 mA version is also available on request.

Ordering and support

Price on request. The EcoSolaris team in Dubai helps you choose the right configuration (power supply, mounting, colour, accessories) and sends a formal quotation.

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shipping & Delivery
Datasheets

Download the full technical datasheet — English or Arabic:

📄 Technical datasheet (EN, PDF)📄 النشرة الفنية (عربي، PDF)

Price on request · Photometric files and installation drawings on request: [email protected] · WhatsApp