Atlas Recessed RGB DMX LED Floodlight 3 LEDs Outdoor

Atlas Recessed RGB DMX LED Floodlight 3 LEDs Outdoor

The Atlas recessed RGB DMX LED floodlight with 3 LEDs is an outdoor in-ground fitting for soil or paving. It serves landscape schemes where the luminaire must disappear from view: walkways, car parks and gardens. It runs at 12-24V DC in protection class III, with the DMX driver inside the housing.

Benefits of the Atlas recessed RGB DMX floodlight

• Invisible installation: the body drops into a hole 87 mm in diameter and 100 mm deep, flush with the surface.
• Electrical safety: a 12-24V DC supply in class III is right for areas open to pedestrians.
• Addressable RGB control: red 650 nm, green 523 nm and blue 470 nm LEDs respond to DMX through the built-in driver.
• Sealed at ground level: IP67 covers dust plus the temporary immersion caused by rain or paving wash-down.
• Light weight: at 0.4 kg it is easy to handle when setting it into a back box.
• Beam of your choice: wide, medium, narrow or omnidirectional, according to the effect you want.

Technical specifications

• Luminaire type: recessed RGB floodlight, Atlas series
• Number of LEDs: 3 (1 x red, 1 x green, 1 x blue)
• Light source: OSRAM LEDs
• LED colour: red 650 nm, green 523 nm, blue 470 nm; other colours on request
• Supply: 12-24V DC (a 230V AC version is available as described for the series)
• Electrical protection class: III
• DMX driver: included, inside the housing
• Beam (configurable): wide, medium, narrow, omnidirectional
• Ingress protection: IP67
• Mounting hole diameter: 87 mm
• Mounting hole depth: 100 mm
• Weight: 0.4 kg
• Use: outdoor
• Markings: CE, F

Applications and installation

The fitting suits commercial, residential, public and architectural work: recessed lighting in walkways and access routes, car parks, gardens, parks and general ambient lighting. Prepare a hole 87 mm in diameter and 100 mm deep with drainage, then connect the DC supply and the DMX line. The F marking also permits installation in timber-framed terraces. IP67 keeps dust out where the fitting sits at ground level. The product is designed and manufactured in Europe.

Frequently asked questions

What size is the mounting hole? 87 mm in diameter and 100 mm deep. Provide a drainage layer beneath the fitting.

Why is it class III? Because it runs at extra-low voltage, 12-24V DC. That is the recommended solution for fittings set into paving that people walk over.

Can I order other LED colours? Yes, other colours are available on request alongside the standard RGB combination.