Growatt BMS | For SPH inverters

★★★★★ ★★★★★
4.7 (6 reviews)
Weight16 kg
Dimensions69 × 18,5 × 29,5 cm
BrandGrowatt
3 People watching this product now!
Description

he Growatt BMS (Battery Management System) controller is a device located between the inverter and the battery. Its function is to check the state of charge of the cells and to balance them, i.e. to charge the cells individually with the current and voltage appropriate for them. With photovoltaic systems also designed for energy storage, the BMS is necessary if the inverter does not have a built-in controller. The BMS controller supports from 3-10 Growatt ARK-2.5H-A1 batteries.

The Growatt hybrid kit should include:

Configuration for one inverter:

(Min. 3) x ARK batteries ( min.  3 ×2.5kW)
1 x inverter + monitoring (Shine WiFi-X, Shine LAN-X or Shine GPRS-X)
1 x BMS (controller for batteries)
1 x Cables for splicing the BMS with the inverter – ARK H – Hight voltage
1 x battery stand – ARK H
1 x bi-directional meter (phasemater), comes in the box with the inverter

 

GENERAL INFORMATION

  • Flexible power selection from 7.68kWh to 25.6kWh
  • BMS controller for 3-10 Growatt ARK-2.5H-A1 batteries – designed for Growatt SPH / SPA TL3-BH UP inverters
  • ARK’s LFP (lithium-iron-phosphate) batteries are cobalt-free and achieve excellent levels of safety and reliability
  • Easy installation thanks to modular, stackable design
  • Remote firmware update
  • Long life, 10-year warranty
  • A minimum of 3 batteries + BMS controller are required for commissioning
  • ARK batteries are IP65 rated for extended trouble-free operation indoors and outdoors
  • The batteries have a compact housing (650*260*180mm) and weigh only 30kg
  • ARKs monitor not only the total state of the battery, but also the individual cells, and provide complete protection of the battery system
  • Balancing the voltage of the cells allowing the battery to last longer
  • Growatt waranty plan
Reviews (6)
4.7
6 reviews
4
2
0
0
0

6 reviews for Growatt BMS | For SPH inverters

Clear filters
  1. Sophie Martin (verified owner)

    Quiet operation, good display, intuitive Bluetooth app. Highly recommend for any serious off-grid build.

  2. Olivia Garcia (verified owner)

    Programming the VE.Bus took some learning but the documentation is excellent. Now runs flawlessly.

  3. Ali Hussain (verified owner)

    Installation manual is detailed. Took about 4 hours to set up the full system including chargers.

  4. Khalid Al-Hashimi (verified owner)

    No fan noise unless under heavy load. The Cerbo GX integration gives me full remote monitoring from my phone.

  5. Noura Al-Nasser (verified owner)

    Programming the VE.Bus took some learning but the documentation is excellent. Now runs flawlessly.

  6. Mohammed Hassan

    Solid unit. Efficiency at low loads could be better but in normal operation it performs well.

Only logged in customers who have purchased this product may leave a review.