Niagara Submersible Pool RGB DMX LED Floodlight 36 LEDs

Niagara Submersible Pool RGB DMX LED Floodlight 36 LEDs

The Niagara submersible pool RGB DMX LED floodlight with 36 LEDs is built for underwater mounting in swimming pools, ornamental basins and fountains. Pool contractors and lighting designers use it for DMX-controlled colour scenes under permanent immersion, at an extra-low voltage that stays safe for bathers.

Benefits of the Niagara submersible pool floodlight

• Underwater operation: the IP68 rating covers continuous immersion, not merely splashing.
• Safe voltage in the basin: a 12-24V DC supply in class III is the baseline requirement for submersible luminaires.
• 36 OSRAM LEDs: 12 red, 12 green and 12 blue give enough output for the water column and the pool floor.
• Integrated DMX control: the driver sits inside the housing, so every unit takes an address and joins the scenes.
• Elliptical beam option: alongside wide, medium and narrow, the elliptical version suits long pool walls.
• Weight of 1.8 kg: a compact body that is easy to fix in a niche or on a bracket.

Technical specifications

• Luminaire type: submersible RGB pool floodlight, Niagara series
• Number of LEDs: 36 (12 x red, 12 x green, 12 x blue)
• Light source: OSRAM LEDs
• LED colour: red 650 nm, green 523 nm, blue 470 nm
• Standard supply: 12-24V DC power supply
• Electrical protection class: III
• DMX driver: included, inside the housing
• Beam (configurable): wide, medium, narrow, elliptical
• Ingress protection: IP68
• Weight: 1.8 kg
• Use: outdoor, submersible
• Markings: CE, F

Applications and installation

The Niagara floodlight covers submersible lighting on architectural projects: private and public pools, decorative basins and fountains. Mount the unit below the water line, feed it from a 12-24V DC power supply installed outside the wet zone, and connect it to the DMX bus of the installation. For identical colour mixing, combine it with the outdoor RGB floodlights of the same family, which use the same wavelengths. The luminaire is designed and manufactured in Europe.

Frequently asked questions

Can it stay underwater permanently? Yes. IP68 is intended for continuous immersion, unlike IP67, which covers temporary immersion only.

How is it powered? Only from a 12-24V DC power supply in class III. Install the power supply outside the basin, in a dry space.

What is the elliptical beam for? It is a stretched beam that washes a long pool wall with fewer units than a round beam.