Victron Energy – VE.Bus BMS V2
753,38 AED
Description
VE.Bus BMS / VE.Bus BMS V2
The VE.Bus BMS V2 is a Battery Management System (BMS) designed to interface with and protect a single, or multiple Victron Lithium Battery Smart 12,8V & 25,6V (LiFePO4 or LFP) in systems that have Victron inverters or inverter/chargers with VE.Bus communication. It monitors and protects the batteries against over voltage and under voltage of any individual cell, and also over temperature or under temperature conditions.
Based on the status of the battery or batteries, the BMS will:
- Generate a pre-alarm signal to alert of an imminent cell under voltage condition.
- Disable inverting in VE.Bus inverters or inverter/chargers via VE.Bus, and disable other loads via the ‘Load Disconnect’ terminal in the event of a cell under voltage condition.
- Disable charging in VE.Bus inverters or inverter/chargers via VE.Bus and disable other chargers via the ‘Charge Disconnect’ terminal in the event of a cell overvoltage, under temperature or over temperature condition.
- Remote on/off terminals.
- Ability to disable VE.Direct and VE.Can solar chargers via a GX device.
- Allowing control of the VE.Bus inverter/charger from multiple devices, like the Digital Multi Control, the VE.Bus Smart dongle and/or a GX device.
- Auxiliary power input and output terminals that allow a GX device to remain powered in the event of a system shutdown.
Additional information
| Weight | 0,12 kg |
|---|---|
| Dimensions | 10,6 × 9,5 × 2,4 cm |
| Brand | Victron Energy |
Reviews (6)
6 reviews for Victron Energy – VE.Bus BMS V2
Only logged in customers who have purchased this product may leave a review.
Shipping & Delivery
Related products
Argodiode 120-2AC 2 batteries 120A
Argodiode Battery Isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery. Low voltage drop due to the use of high efficiency Schottky diodes.
Argodiode 140-3AC 3 batteries 140A
Argodiode Battery Isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery. Low voltage drop due to the use of high efficiency Schottky diodes.
Argodiode 160-2AC 2 batteries 160A
Argodiode Battery Isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery. Low voltage drop due to the use of high efficiency Schottky diodes.
Argodiode 180-3AC 3 batteries 180A
Argodiode Battery Isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery. Low voltage drop due to the use of high efficiency Schottky diodes.
Cyrix-i 12/24V-400A intelligent battery combiner
The Cyrix Intelligent Battery Combiner is a microprocessor controlled heavy duty relay that automatically connects batteries in parallel when one of them has reached a pre-set voltage (indicating that the battery is being charged), and disconnects when the voltage decreases below float level (indicating that one or more batteries are being discharged).
Diode Battery Combiner BCD 402 2 batteries 40A
Diode Battery Combiners are used to guarantee continuous DC power to mission critical equipment, such as an electronic engine control system. With a Diode Battery Combiner two or more DC power sources can be used in parallel to supply the mission critical load. Failure of one source will not interrupt power to the critical load.
Diode Battery Combiner BCD 802 2 batteries 80A
Diode Battery Combiners are used to guarantee continuous DC power to mission critical equipment, such as an electronic engine control system. With a Diode Battery Combiner two or more DC power sources can be used in parallel to supply the mission critical load. Failure of one source will not interrupt power to the critical load.
Michael O’Connor –
Reliable supplier in Dubai. Stock availability is great and prices are competitive.
Olivia Garcia –
Solid product, fair price. The detailed specs on the website helped me decide.
Hassan Reza –
Happy with the purchase. Would have liked faster shipping but quality is good.
Sarah Williams (verified owner) –
Quality matches the price. Recommended for anyone setting up a solar system in the UAE.
Imran Sheikh (verified owner) –
Good experience overall. Will recommend to friends doing solar projects.
Emma Thompson –
Reliable supplier in Dubai. Stock availability is great and prices are competitive.