Inverter Cable Kit 95mm², Copper with Terminals, 2m

626,30 AED

🚚
DHL Express → UAE: from ~147 AED · delivery ~2-3 days
Exact cost calculated at checkout based on your address · estimate
SKU: ECO-CB2M100 Category: Tag:
Description

Inverter Cable Set 95mm², Copper with Terminals, 2m

Set of two 95 mm² copper cables – one red for positive and one black for negative – each 2m long, with crimped copper lugs at both ends. These are installed between the inverter and battery bank (or Lynx distribution block), ready to connect to the terminals.

What you use it for

The 95 mm² section is suitable for inverters of 15–20 kVA (Victron MultiPlus-II 48/15000), where two sets are mounted per inverter — one on each pair of terminals.

Specifications

  • Conductor cross-section: 95 mm², copper
  • Length: 2 m red (+) cable and 2 m black (-) cable
  • Crimped copper lugs at both ends (95/10)
  • Working voltages: 12, 24 and 48 V systems

How to choose the cross-section

The cable between the batteries and the inverter carries very high currents: a 5 kVA inverter requires over 100 A at 48 V and over 200 A at 24 V. A cable that is too thin will heat up and lose voltage, causing the inverter to shut down with a low voltage alarm precisely when you need power. The rule we use for EcoSolaris installations:

  • Up to 3 kVA at 48 V – 35 mm²
  • From 5 kW upwards – 50 mm²
  • 8–10 kW – 70 mm²
  • 15–20 kW – two sets of 95 mm² per inverter

Always choose the shortest length you need: the shorter the run, the lower the losses.

Safe Installation

  • A fuse (e.g., MEGA, in a holder or on a Lynx Distributor) should be fitted to the positive cable as close as possible to the batteries, with the amperage rating recommended in the device manual.
  • Terminals must be tightened to the torque specified in the manual; loose connections heat up and are the most common cause of faults on the DC side.
  • The red and black cables should run together along the same route and must not be extended by splicing.

Not sure which section is right for you? Use the “Request a Quote” button on our website: we’ll size the entire system for you, including the correct cables and fuses.

Additional information
Weight4,3 kg
Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shipping & Delivery