Helukabel Solar Cable Kit 6mm², 25m Red + 25m Black with MC4 Connectors
363,07 AED
Solar cable set 6mm² Helukabel, 25m red + 25m black, with MC4 connectors
Ready-to-install kit for connecting a string of photovoltaic panels to the DC protection panel or directly to the inverter or solar charge controller: 25m of red cable for positive and 25m of black cable for negative, with crimped MC4 connectors. The cable is Helukabel SOLARFLEX®-X H1Z2Z2-K, manufactured in Germany to European standard EN 50618 for photovoltaic installations.
What the kit contains
- 25m red solar cable, 1 x 6mm²
- 25m black solar cable, 1 x 6mm²
- 1 set of crimped MC4 male/female connectors
Why use solar cable, and not standard electrical cable
A photovoltaic system cable spends decades on the roof, in sun, frost and rain, and operates at direct voltages of hundreds of volts. SOLARFLEX-X is made for this: insulation and jacket made of crosslinked compound, resistant to UV radiation, ozone and weathering, halogen-free, suitable for outdoor installation and even direct burial. The conductor is tinned copper, fine stranded (class 5), therefore flexible during installation and protected against corrosion in lugs and connectors.
Technical data of the cable (from Helukabel datasheet)
- Type: SOLARFLEX®-X H1Z2Z2-K, single core cable, compliant with DIN VDE 0283-618 / EN 50618
- Rated voltage: 1500 V DC (1000 V AC); test voltage 6500 V
- Conductor: tinned copper, fine stranded multi-wire, class 5 (IEC 60228)
- Cross section 6 mm² (AWG 10), outer diameter 5.8–6.4 mm, approximately 80 kg/km
- Temperature: −40 °C … +90 °C in fixed installation; up to +120 °C on the conductor; +250 °C short circuit (maximum 5 s)
- Minimum bending radius: 4 × outer diameter in fixed installation
- UV, ozone and weathering resistant · halogen-free · for outdoor use and direct burial
Helukabel SOLARFLEX-X H1Z2Z2-K Technical Datasheet (PDF)
MC4 Connectors
- MC4 male/female connectors, for voltages up to 1000 V DC.
- Tin-plated copper contacts, protection class II
- Connect directly to panel plugs; use the MC4 key for disconnection
How to choose the length
Measure the actual cable run from the first and last panel in the string to the DC panel – on the roof, alongside the downpipe or through conduit – and add a reserve of 1–2 m. One set is used for a single string. As a guide, for a string of 460 W panels (approximately 10 A), a 25m set will lose around 1.7 V across the entire run – negligible.
Available sizes: 5, 10, 15, 20, 25, 30 and 50 ml. For string protection, please see the DC protective devices, and to size the entire system use the ‘Request a Quote’ button.
| Weight | 4,1 kg |
|---|
Only logged in customers who have purchased this product may leave a review.




Reviews
There are no reviews yet.