Battery Protect 48V-100A
580,91 AED
Description
Battery Protect
The Battery Protect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
The BatteryProtect is a uni-directional device. It can only deal with current in one direction, so either current to a load, or current from a charger, but not both currents at the same time. In addition to this, current only can only flow from the Battery terminal to the Load terminal. In case of use with a load, the battery connects to the Battery terminal, and in case of use with a charger, the charger connects to the Battery terminal.
Additional information
| Weight | 0,8 kg |
|---|---|
| Dimensions | 12 × 12,3 × 6,2 cm |
| Brand | Victron Energy |
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Shipping & Delivery
Datasheets
Related products
Argodiode 120-2AC 2 batteries 120A
367,62 AED
Rated 5.00 out of 5
Argodiode Battery Isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery. Low voltage drop due to the use of high efficiency Schottky diodes.
Argofet 100-3 Three batteries 100A
558,22 AED
Rated 4.80 out of 5
Argofet 200-2 Two batteries 200A
580,91 AED
Cyrix-ct 12/24V-120A intelligent battery combiner
236,00 AED
Rated 4.80 out of 5
The Cyrix Intelligent Battery Combiner is a microprocessor controlled heavy duty relay that automatically connects batteries in parallel when one of them has reached a pre-set voltage (indicating that the battery is being charged), and disconnects when the voltage decreases below float level (indicating that one or more batteries are being discharged).
Cyrix-i 24/48V-400A intelligent battery combiner
1.248,06 AED
Rated 4.40 out of 5
The Cyrix Intelligent Battery Combiner is a microprocessor controlled heavy duty relay that automatically connects batteries in parallel when one of them has reached a pre-set voltage (indicating that the battery is being charged), and disconnects when the voltage decreases below float level (indicating that one or more batteries are being discharged).
Diode Battery Combiner BCD 802 2 batteries 80A
217,84 AED
Diode Battery Combiners are used to guarantee continuous DC power to mission critical equipment, such as an electronic engine control system. With a Diode Battery Combiner two or more DC power sources can be used in parallel to supply the mission critical load. Failure of one source will not interrupt power to the critical load.
Isolation Transformer 2000W 115/230V
1.924,29 AED
Rated 4.50 out of 5
Isolation Transformer 3600W 115/230V
2.895,51 AED
Rated 4.38 out of 5


Reviews
There are no reviews yet.