Battery Protect 12/24V 65A
177,00 AED
Description
Battery Protect
The Battery Protect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
The BatteryProtect is a uni-directional device. It can only deal with current in one direction, so either current to a load, or current from a charger, but not both currents at the same time. In addition to this, current only can only flow from the Battery terminal to the Load terminal. In case of use with a load, the battery connects to the Battery terminal, and in case of use with a charger, the charger connects to the Battery terminal.
Additional information
| Weight | 0,2 kg |
|---|---|
| Dimensions | 10,6 × 4,8 × 4 cm |
| Brand | Victron Energy |
Reviews (6)
6 reviews for Battery Protect 12/24V 65A
Only logged in customers who have purchased this product may leave a review.
Shipping & Delivery
Related products
Argodiode 100-3AC 3 batteries 100A
Argodiode Battery Isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery. Low voltage drop due to the use of high efficiency Schottky diodes.
Argodiode 80-2AC 2 batteries 80A
Argodiode Battery Isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery. Low voltage drop due to the use of high efficiency Schottky diodes.
Argodiode 80-2SC 2 batteries 80A
Argodiode Battery Isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery. Low voltage drop due to the use of high efficiency Schottky diodes.
Diode Battery Combiner BCD 402 2 batteries 40A
Diode Battery Combiners are used to guarantee continuous DC power to mission critical equipment, such as an electronic engine control system. With a Diode Battery Combiner two or more DC power sources can be used in parallel to supply the mission critical load. Failure of one source will not interrupt power to the critical load.
Ali Hussain –
Replaced my old AGM bank with this lithium pack. Half the weight, double the usable capacity, and faster charging.
Sana Iqbal (verified owner) –
Holds 95% capacity after 8 months of daily cycling. Very impressive for the price point.
Maria Rodriguez (verified owner) –
The 15kWh unit is perfect for my villa. Pairs with the EcoSolaris inverter via CAN bus, plug-and-play.
Nina Petrova (verified owner) –
LiFePO4 chemistry is the way to go. Holds charge perfectly and the BMS communicates seamlessly with my inverter.
Karim Sayed (verified owner) –
Replaced my old AGM bank with this lithium pack. Half the weight, double the usable capacity, and faster charging.
Michael O’Connor (verified owner) –
Holds 95% capacity after 8 months of daily cycling. Very impressive for the price point.