Airfield and heliport ground lighting: runway and taxiway edge lights, threshold and end lights, TLOF and FATO perimeter lights, approach path indicators, windsock illumination and elevated or inset fittings for helidecks.Photometry follows ICAO Annex 14 and FAA specifications, with constant-current series or mains-fed versions and control interfaces for the airfield lighting control system.

Aiming Heliport LED Light 10W Aiming Point

Request a quote Request a quote
The Aiming heliport LED light marks the aiming point used in the landing procedure. White light above 100 cd, settings of 10%, 30% and 100%, a 10 W body in aviation yellow aluminium, IP66. Price on request.

Approach Steady Heliport LED Light 20W Fixed Light

Request a quote Request a quote
This Approach Steady heliport LED light serves the visual approach systems of heliports. It carries 8 OSRAM LEDs, 20 W, fixed white light above 350 cd and 10/30/100% dimming to ICAO. Price on request.

Apron LED Floodlight 300-450W for Airport Aprons

Request a quote Request a quote
This Apron LED floodlight lights aircraft boarding and parking aprons with 9 Bridgelux COB LEDs, 300-450 W and a minimum output of 45,000 lm. Neutral white 4000 K or cool white 5000 K, IP65, IK10. Price on request.

Barikada Obstacle LED Light 12V DC 1.5W

Request a quote Request a quote
The Barikada obstacle LED light marks airport obstacles with omnidirectional red light above 10 cd. It draws 1.5 W at 12 V DC, has a built-in photocell and is rated IP65 and IK10. Price on request.

DCR Constant Current Regulator for Pearl LED Airfield Lighting

Request a quote Request a quote
This DCR constant current regulator powers and controls Pearl LED airfield lights. It gives three intensity steps, open-circuit and overcurrent protection, in four versions with one or two 450 W outputs. Price on request.

FATO Heliport LED Light 10W Final Approach Area

Request a quote Request a quote
This FATO heliport LED light outlines the final approach and take-off area of a helipad, with white light above 100 cd and three-step dimming to ICAO Annex 14. A 10 W body, IP66, IK10. Price on request.

Heliport LED Beacon 64 LED Morse H Signal

Request a quote Request a quote
This heliport LED beacon flashes the letter H in Morse code, to ICAO Annex 14 Volume 2, to identify a heliport from a distance. It carries 64 OSRAM LEDs, white light above 100 cd and a 230 V supply. Price on request.

Heliport LED Floodlight 20W 120 lm/W

Request a quote Request a quote
This heliport LED floodlight lights the landing surface at 120 lm/W with white light to CIE limits, delivering a minimum of 10 cd/m2. Low body of no more than 130 mm, 20 W, driver included, IP65, IK10. Price on request.

Hely Heliport LED Lighting Controller 600W 48V DC

Request a quote Request a quote
The Hely heliport LED lighting controller powers and commands a complete heliport lighting system: 600 W at 48 V DC, LCD display, three intensity steps, compatible with TLOF, FATO, Aiming, Approach and Beacon fittings. Price on request.

Hely Recessed LED Taxiway Light for Heliports 6W

Request a quote Request a quote
The Hely recessed LED taxiway light marks heliport taxiways and the FATO area with blue light to ICAO Annex 14. It draws 6W, carries IP X8 protection and operates from -55 to +55 degrees C. Price on request.

Inset FATO Recessed LED Light 9W for Heliports

Request a quote Request a quote
This Inset FATO recessed LED light marks the final approach and take-off area of a heliport at deck level, with nothing raised above the surface. Toughened glass lens, 9 W, IPX8, -55 degrees C to +55 degrees C, to ICAO Annex 14 and IEC TS 61827. Price on request.

Inset TLOF Recessed LED Light 6W for Heliports

Request a quote Request a quote
The Inset TLOF recessed LED light marks the touchdown and lift-off area of a heliport flush with the surface, on just 6 W. Aluminium and toughened glass, IPX8, -55 degrees C to +55 degrees C, dimmable at 48 V DC, to ICAO Annex 14 and IEC TS 61827. Price on request.