LS-05 Protect LED Emergency Luminaire 2W

LS-05 Protect LED Emergency Luminaire 2W

The LS-05 Protect LED emergency luminaire is a surface-mounted escape sign built around OSRAM LEDs. It is aimed at facility managers who must mark evacuation routes in offices, schools and hospitals. Light travels through two plastic plates on the fibre optic principle, so the ideogram stays sharp and legible from a distance.

Benefits

• Legible ideogram: one plate is lit by green or red LEDs and the other by white LEDs, so the symbol separates from its background.
• No blackout gap: the luminaire runs permanently from the mains and switches to NiMH batteries for at least 3 hours when power drops.
• Simple verification: the test button and charging indicator LED report the status without instruments.
• 2W consumption: the cost of continuous operation stays negligible across a whole building.
• Wall or ceiling mounting: the same body adapts to any escape route geometry.
• Custom legend: the diffuser carries the ideogram your fire safety drawing requires.

Technical specifications

• Operating principle: fibre optic, through two plastic plates
• Operating mode: permanent illumination, mains supplied or battery supplied on mains failure
• Housing material: electrostatically painted aluminium sheet
• Housing colour: white (standard)
• Diffuser: transparent polycarbonate, legend printed to order
• Light source: OSRAM LEDs; green or red on one plate, white on the other
• Total power: 2W
• Power supply: 230V AC, 50Hz (standard)
• Batteries: NiMH, minimum 3 hours of autonomy
• Equipment: test button, charging indicator LED
• Electrical protection class: III
• Ingress protection: IP40
• Operating temperature: 0 to +40 degrees C
• Mounting: on wall or ceiling
• Dimensions: 355 x 40 x 145 mm
• Weight: 0.8 kg

Applications and installation

Install the LS-05 Protect LED emergency luminaire along corridors, in stairwells and above exit doors in offices, schools, hospitals and other public buildings. It mounts on the surface of a wall or ceiling and connects to 230V AC. With IP40 protection and a 0 to +40 degrees C range, it belongs in dry, air-conditioned interiors, not in humid plant rooms or outdoor areas. State the ideogram and the background colour when you order, so each unit matches its position on the escape plan.

Frequently asked questions

How long does it stay lit after a power cut? A minimum of 3 hours, powered by the integrated NiMH batteries.

How do I check that the batteries are charged? The luminaire has a charging indicator LED and a test button that simulates a mains failure.

Can I choose the legend on the diffuser? Yes. The diffuser is printed to match your own signage requirements.