Proton II Street LED Floodlight 36 LEDs 90W

Proton II Street LED Floodlight 36 LEDs 90W

The Proton II street LED floodlight with 36 LEDs is the 90 W version of the series. It runs high power OSRAM sources. It suits local authorities, large sites and sports clubs. They need steady light on ME4 roads and car parks. It weighs 4.6 kg and tilts within 45 degrees on the bracket.

Benefits

• Balanced output: 90 W from 36 OSRAM LEDs with a rated life of 100,000 hours.
• Elliptical asymmetric distribution: dedicated lenses send light along the carriageway, with little loss to the sides.
• Flexible mounting: vertical pole, bracket or flat surface, with a tilt of plus or minus 45 degrees.
• Mechanical strength: an extruded aluminium housing and a 3 mm UV protected polycarbonate diffuser, rated IK10.
• IP66 sealing: the body handles rain and dust and runs between -20 degrees C and +40 degrees C.
• No separate driver: the 90-230 V AC power supply sits inside the housing.

Technical specifications

• Housing material: extruded aluminium, electrostatically powder coated
• Diffuser: 3 mm clear polycarbonate, UV protected
• Housing colour: grey (standard)
• Number of LEDs: 36
• Total power: 90 W
• Light source: high power OSRAM LEDs, 100,000 hours
• Colour rendering index (CRI): 80 for neutral white, 70 for cool white
• LED colour (configurable): neutral white 4000 K or cool white 5000 K
• Focusing: elliptical, elliptical asymmetric beam
• Supply: 90-230 V AC, 50-60 Hz, driver built into the housing
• Electrical insulation class: I
• Power factor: above 0.95
• Total harmonic distortion: below 20%
• Ingress protection: IP66
• Impact resistance: IK10
• Operating temperature: -20 degrees C to +40 degrees C
• Tilt adjustment: plus or minus 45 degrees
• Dimensions: 355 x 248 mm
• Weight: 4.6 kg
• Markings: CE, F (mounting on normally flammable surfaces)

Applications and installation

Recommended applications are street lighting on ME4 class roads, car park lighting, perimeter lighting and sports ground lighting. The luminaire fits residential, commercial and public projects. The F marking allows direct mounting on normally flammable surfaces. The 90-230 V AC input matches existing lighting circuits. Fix the body on the pole, connect the mains cable, then aim it within the 45 degree range.

Frequently asked questions

How does it compare with the 80 W model with 24 LEDs? This version carries 36 LEDs, 90 W and 4.6 kg on the same 355 x 248 mm housing. It gives more flux for wider streets.

Does it resist vandalism? The 3 mm diffuser and the extruded aluminium housing reach IK10, the highest class on the common scale.

Which light colour do you recommend for streets? Neutral white 4000 K has CRI 80 and renders colours more naturally. Cool white 5000 K has CRI 70 and reads as brighter.