VE.Can Power Cable
149,77 AED شامل الضريبة
Skylla-i remote on-off cable
163,38 AED شامل الضريبة
VE.Direct non inverting remote on-off cable
90,77 AED شامل الضريبة
🚚
DHL Express → UAE:
from ~216 AED
· delivery ~2-3 days
Exact cost calculated at checkout based on your address · estimate
الوصف
VE.Direct non inverting remote on/off cable
VE.Direct non inverting remote on/off cable – Use this cable to remotely control BlueSolar and SmartSolar MPPT charge controller models.
Note that it’s not necessary to use this cable on the larger SmartSolar models, as they feature an onboard Remote On/Off terminal.
The charger will be enabled when the signal on the cable is high. The charger is disabled when the source signal is pulled low or left free floating.
Note that when using this cable, it’s not possible to use the VE.Direct port for any other purpose. Such as connecting to a GX device, or for example a VE.Direct Bluetooth Smart dongle on a BlueSolar charger.
معلومات إضافية
| الوزن | 0,5 كيلوجرام |
|---|---|
| Brand | Victron Energy |
مراجعات (5)
5 مراجعات لـ VE.Direct non inverting remote on-off cable
يسمح فقط للزبائن مسجلي الدخول الذين قاموا بشراء هذا المنتج ترك مراجعة.
Shipping & Delivery
منتجات ذات صلة
Argodiode 100-3AC 3 batteries 100A
Argodiode Battery Isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery. Low voltage drop due to the use of high efficiency Schottky diodes.
Argodiode 80-2AC 2 batteries 80A
Argodiode Battery Isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery. Low voltage drop due to the use of high efficiency Schottky diodes.
Cyrix-ct 12/24V-120A intelligent battery combiner
The Cyrix Intelligent Battery Combiner is a microprocessor controlled heavy duty relay that automatically connects batteries in parallel when one of them has reached a pre-set voltage (indicating that the battery is being charged), and disconnects when the voltage decreases below float level (indicating that one or more batteries are being discharged).
Diode Battery Combiner BCD 402 2 batteries 40A
Diode Battery Combiners are used to guarantee continuous DC power to mission critical equipment, such as an electronic engine control system. With a Diode Battery Combiner two or more DC power sources can be used in parallel to supply the mission critical load. Failure of one source will not interrupt power to the critical load.
Isabella Costa (عميل موَثَّق) –
Cross-section matches spec when measured. No fake aluminum core like some cheap alternatives.
Sana Iqbal (عميل موَثَّق) –
Arrived quickly, proper labeling, certified PV-rated. Doing the job perfectly.
Aisha Rahman (عميل موَثَّق) –
Used these for the main DC run from panels to combiner box. No voltage drop issues even at 50m.
Hamza Bashir –
Arrived quickly, proper labeling, certified PV-rated. Doing the job perfectly.
Maria Rodriguez (عميل موَثَّق) –
Right thickness for my 10kW inverter run. Tinned copper makes crimping clean and reliable.