Titan 36 Adjustable Industrial LED Floodlight 180W

Titan 36 Adjustable Industrial LED Floodlight 180W

The Titan 36 industrial LED floodlight delivers up to 23231 lm from 180 W and sits in the middle of the Titan range. It answers to facility managers running high bays, logistics terminals, cold stores and industrial yards who need more light per mounting point than a 120 W body gives, without changing housing or bracket.

Benefits

• Fewer mounting points: at 23231 lm per unit you cut the number of floodlights, cable runs and brackets over the same area.
• Street optic for internal roads: mounted on a pole, the asymmetric distribution lights the carriageway instead of spilling sideways.
• Efficacy up to 129 lm/W: the extruded aluminium profile keeps the LEDs cool, so output stays stable through long duty cycles.
• Built for harsh sites: IP66 against dust and water jets, IK10 against impact, with grey RAL7040 electrostatic powder coating.
• Aim it where you need it: fix the body to a wall, beam, ceiling or pole, then set the angle during commissioning.
• No separate gear box: the driver is built in and the power factor above 0.95 keeps the absorbed current close to the minimum.

Technical specifications

• Mounting type: on a flat surface or on a pole, adjustable
• Material: extruded aluminium
• Colour: grey RAL7040, electrostatically powder coated
• Power: 180 W
• Luminous flux: 22008 – 23231 lm, depending on the optic
• Luminous efficacy: 122 – 129 lm/W
• Optical efficiency: 93.2 % – 98.3 %
• Available optics: wide, medium, narrow, extra wide, street
• Colour temperature (CCT): 4000 K or 5000 K
• Colour rendering index: CRI 80
• Power factor: above 0.95
• Control: on/off
• Ingress protection: IP66
• Impact resistance: IK10
• Electrical class: I
• Driver included: yes
• Adjustable: yes
• Dimensions: 167 x 150 x 616 mm

Applications and installation

Use the body in tall production and logistics halls, container terminals, outdoor storage yards, wash bays, car parks and industrial perimeters. IP66 means the dust-laden air and washdown water of Gulf sites do not reach the gear, and IK10 covers areas with moving plant. Choose 4000 K for neutral white or 5000 K for a colder, higher-contrast outdoor light. Supply is class I with an earth conductor, integrated driver and on/off switching. Design and production take place in Europe.

Frequently asked questions

How does Titan 36 differ from Titan 24? Titan 36 gives 180 W and up to 23231 lm against 120 W and 15487 lm, in a longer housing of 616 mm instead of 445 mm. Efficacy, optics and protection ratings match.

Can I fit it on a pole beside a road? Yes, with the street optic. Pole mounting is one of the intended fixing methods.

Does it need an external driver? No. The driver is inside the body and the unit wires straight to the mains through a protective conductor.