Helukabel 6mm² Solar Cable Kit – 50m Red + 50m Black with MC4 Connectors
658,07 درهم شامل الضريبة
Solar Cable Set 6mm² Helukabel, 50m Red + 50m Black, with MC4 Connectors
Ready-to-install kit for connecting a string of photovoltaic panels to the DC protective panel or directly to the inverter or solar charge controller: 50m of red cable for positive and 50m of black cable for negative, with crimped MC4 connectors. The cable is هيلوكابيل سولارفلكس®-X H1Z2Z2-Kتم تصنيعها في ألمانيا وفقًا للمعيار الأوروبي EN 50618 للمنشآت الكهروضوئية.
ما تحتويه المجموعة
- 50m red solar cable, 1 × 6 mm²
- 50m black solar cable, 1 × 6 mm²
- 1 set of crimped MC4 female / male connectors
Why solar cable, and not standard electrical cable
A photovoltaic system cable spends decades on the roof, in sun, frost and rain, and operates at direct voltages of hundreds of volts. SOLARFLEX-X is made for this: insulation and jacket from a crosslinked compound, resistant to UV radiation, ozone and weathering, halogen-free, suitable for outdoor installation and even direct burial. The conductor is tinned copper, fine stranded (class 5), therefore flexible during installation and protected against corrosion in lugs and connectors.
Technical data of the cable (from the Helukabel datasheet)
- Type: SOLARFLEX®-X H1Z2Z2-K, single core, compliant with DIN VDE 0283-618 / EN 50618
- الفولطية المقدرة: 1500 فولت تيار مستمر (1000 فولت تيار متردد)؛ اختبار الجهد 6500 فولت
- الموصل: نحاس معلب، أسلاك متعددة مجدولة، الفئة 5 (IEC 60228)
- Cross-section 6 mm² (AWG 10), outer diameter 5.8–6.4 mm, approximately 80 kg/km
- درجة الحرارة: -40 درجة مئوية ... +90 درجة مئوية في التركيب الثابت؛ ما يصل إلى +120 درجة مئوية على الموصل؛ +250 درجة مئوية ماس كهربائى (بحد أقصى 5 ثوان)
- الحد الأدنى لنصف قطر الانحناء: 4 × القطر الخارجي في التثبيت الثابت
- مقاوم للأشعة فوق البنفسجية والأوزون والعوامل الجوية · خالي من الهالوجين · للاستخدام الخارجي والدفن المباشر
Helukabel SOLARFLEX-X H1Z2Z2-K Technical Data Sheet (PDF)
موصلات MC4
- موصلات MC4 ذكر/أنثى، لجهد يصل إلى 1000 فولت تيار مستمر.
- وصلات نحاسية مطلية بالقصدير، فئة الحماية الثانية
- الاتصال مباشرة بمقابس اللوحة؛ استخدم مفتاح MC4 لقطع الاتصال
كيفية اختيار الطول
Measure the actual cable run from the first and last panel of the string to the DC panel – on the roof, alongside the downpipe or through conduit – and add a reserve of 1–2 m. One set is used for a single string. As a guide, with a 460 W panel string (approximately 10 A), a 50m set will lose around 3.5 V across the entire run – less than 1% on a six-panel string.
Available sizes: 5, 10, 15, 20, 25, 30 and 50 ml. For string protection, please see the DC protective boards, and to size the entire system use the ‘Request a Quote’ button.
| الوزن | 8,1 كيلوجرام |
|---|
يسمح فقط للزبائن مسجلي الدخول الذين قاموا بشراء هذا المنتج ترك مراجعة.




التقييمات
لا توجد مراجعات بعد.